Quick Specs
Discharge Size: 3 Inch
Maximum Flow: 360 GPM (135 LPM)
Maximum Head: 200 Feet (61 M)
Hydraulic Input: 12 GPM Max. (45 LPM)
Hydraulic Pressure: 2300 PSI Max. (156 Bar)
Weight: 41 lbs. (19 Kg)


Key Features
• Hardened Stainless Steel Impeller resists wear
• Rubber Coated Suction Case resists abrasion
• Small Overall Size allows pump to fit through 8" diameter opening
• Oil Lubricated Seals (can run dry)
• Variable Speed hydraulic drive
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Dependable gear type hydraulic motor
• Operates with our HT15 to HT25 power units or other hydraulic power sources capable of flows to 12 GPM


Specifications
WEIGHT: 41 lbs. (19kg) HEIGHT: 19 3/4" (50 cm)
DIAMETER: 7 1/2" (19 cm)
DISCHARGE: 3", NPT(F)
SOLIDS HANDLING: 1/4" (7 mm)
HOSE PORTS: 1/2" NPT (F)
PUMP BODY: Anodized Aluminum
IMPELLER: 17-4 PH Stainless Steel
SUCTION CASE: Rubber Lined
WEAR PLATE: Polyethylene
SHAFT: Stainless Steel
SHAFT SEAL: Silicon Carbide
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max. 12 GPM (45 LPM)
OPERATING PRESSURE: Max. 2300 PSI (156 Bar)
POWER SOURCE: Any Open Center Hydraulic System