Quick Specs
Discharge Size: 3 Inch
Maximum Flow: 450 GPM (1700 LPM)
Maximum Head: 92 Feet (28 Mtrs)
Hydraulic Input: 8 GPM (30 LPM) Max.
Hydraulic Pressure: 2500 PSI (170 Bar) Max.
Weight: 28 Lbs. (13 Kg)


Key Features
• Stainless Steel Channel Impeller
• Oil Lubricated Seals (can run dry)
• Variable Speed hydraulic drive
• Small overall size for use tight spaces
• Can be bolted directly into a pipeline
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Dependable gear type hydraulic motor
• Operates with our HT11 to HT15 power
units or other hydraulic power sources capable of flows of 5-8 GPM


Specifications
WEIGHT: S3TC: 28 lbs. (13 kg); S3TCDI: 52 lbs. (24 kg)
HEIGHT: 14" (36 cm)
WIDTH (@ widest point): 11 3/4" (30 cm)
DISCHARGE: 3" NPT(F)
INLET FLANGE: 3" 125# ASA
SOLIDS HANDLING: 3/4" (2 cm)
HOSE PORTS: 1/2" NPT (F)
PUMP BODY: S3TC: Aluminum; S3TCDI: Ductile Iron
IMPELLER: Stainless Steel
WEAR RING: Ductile Iron
WEAR PLATE: Steel
SHAFT: Plated 4140 Steel
SHAFT SEAL: Carbon/Ceramic (Std)
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max. 8 GPM (30 LPM)
OPERATING PRESSURE: Max. 2500 PSI (170 Bar)
POWER SOURCE: Any Open Center Hydraulic System