| |
The S3CHL is ideal where small size, yet high
performance pumping is required. The 11 3/4 in.
diameter size and intrinsically safe hydraulic drive
allow this pump to be installed in areas previously
considered inaccessible. Applications include portable
firefighting, mine and deepwell de-watering, barge
and ship cargo pumping, tank stripping, irrigation,
piling and dock jetting, and in-line booster pumping.
 |
|
Quick Specs
Discharge Size:
2 Inch
Maximum Flow: 500 GPM (1890 LPM)
Maximum Head:
410 Feet (125 M)
Hydraulic Input:
30 GPM Max.
Hydraulic Pressure:
3000 PSI Max.
Weight:
88 lbs. (Ductile Iron)
Key Features
• Compact, Powerful pump for High-Head
applications
• Will Pass Through a 12 in. "Butterworth"
opening or Deepwell Casing
• Oil Lubricated Seals (can run dry)
• Variable Speed hydraulic drive
• Wide Range of performance
• Can be bolted directly into a pipeline
• Safe Hydraulic Drive can be used where
electric power is hazardous or impractical
• High Efficiency piston hydraulic motor
• Operates with our HT50 to HT100 power
units or other hydraulic power sources with
flows of 15 - 30 GPM
Specifications
WEIGHT: 88 lbs. (40 kg)
HEIGHT: 20" (51cm)
WIDTH(@ widest point): 11 3/4" (30 cm)
DISCHARGE: 2" NPT(F)
INLET FLANGE: 3" 125# ASA
HOSE PORTS: 3/4" SAE (-12) or NPT(F)
PUMP BODY: Ductile Iron
IMPELLER: Bronze
WEAR RINGS: (2) Bronze
SHAFT: Stainless Steel
SHAFT SEAL: Carbon / Ceramic (Std)
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: SAE 10W or 20W Type AW
also: Dexron ATF or Bio-degradeable Oil
INPUT FLOW: Max. 30 GPM (114 LPM)
OPERATING PRESSURE: Max 3500 PSI (238 Bar)
POWER SOURCE: Any Open Center Hydraulic System
|
|
|
Print spec sheet with performance curves (.pdf)