Quick Specs
Discharge Size: 2 Inch
Maximum Flow: 450 GPM
Maximum Head: 410 Feet
Hydraulic Input: 16 GPM Max. (60 LPM)
Hydraulic Pressure: 3500 PSI Max. (238 Bar)
Weight: 45 lbs. (21 Kg) (Aluminum)


Key Features
• Compact, Powerful pump for High-Head applications
• Will pass through a 12 in. diameter deck opening or deepwell casing
• Oil Lubricated Seals (can run dry)
• Variable Speed hydraulic drive
• Wide Range of performance
• Can be bolted directly into a pipeline
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• High Efficiency piston hydraulic motor
• Operates with our HT15 to HT35 power units or other hydraulic power sources with flows to 10 -16 GPM


Specifications
WEIGHT: 45 lbs. (21 kg)
HEIGHT: 16 5/8" (42 cm)
WIDTH(@ widest point): 11 3/4" (30 cm)
DISCHARGE: 2" NPT(F)
INLET FLANGE: 3" 125# ASA
HOSE PORTS: 3/4" SAE (-12) or NPT(F)
PUMP BODY: Heat Treated Aluminum
IMPELLER: Bronze
WEAR RINGS: Bronze
SHAFT: Stainless Steel
SHAFT SEAL: Carbon / Ceramic (Std)
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: SAE 10W or 20W Type AW
also:..Dexron ATF or Bio-degradeable Oil
INPUT FLOW: Max. 16 GPM (60 LPM)
OPERATING PRESSURE: Max 3500 PSI (238 Bar)
POWER SOURCE: Any Open Center Hydraulic System