|
|
| |
|
|
| |
Pumps > High Volume Axial Flow |
|
| |
|
|
| |
S18M
18” HYDRAULIC SUBMERSIBLE
AXIAL FLOW HIGH VOLUME PUMP |
|
| |
The S18M is designed for pumping high
volumes of water at low to medium heads.
The mixed flow impeller allows this pump to
be used in a wide range of applications
including lake draining, stream by-pass,
flood control, drydock, foundation and
cofferdam de-watering.
 |
|
Quick Specs
Discharge Size:
18 Inch
Maximum Flow:
10,000 GPM (37,500 LPM)
Maximum Head:
60 Feet (18 M)
Hydraulic Input:
70 GPM (265 LPM) Max.
Hydraulic Pressure:
2500 PSI (170 Bar) Max.
Weight:
897 lbs. (406 Kg)
Key Features
• High Volume Axial Flow design
• High Efficiency mixed flow impeller
• Small Overall Size allows for use in
tight spaces
• Variable Speed hydraulic drive
• Oil Lubricated Seals (can run dry)
• High Efficiency Balanced Vane hydraulic
motor
• Safe Hydraulic Drive can be used where
electric power is hazardous or
impractical
• Operates with our HT100 to HT150
power units or other hydraulic power
sources capable of flows of 50 - 70 GPM
Specifications
WEIGHT: 897 lbs. (406 kg)
HEIGHT: 55" (140 cm)
DIAMETER (@ widest point): 34" (86 cm)
DISCHARGE: 18" O.D. Pipe or Flange
SOLIDS HANDLING: 1" (25 mm)
HOSE PORTS: 1 1/2 " NPT
HYDRAULIC COUPLINGS: 1 1/2 " Wing Nut Style
PUMP BODY: Cast Iron
IMPELLER: Bronze
SHAFT: Stainless Steel
SHAFT SEALS: Carbon/Ceramic (Std)
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max. 70 GPM (265 LPM)
OPERATING PRESSURE: Max. Cont. 2500 PSI (170 Bar)
POWER SOURCE: Any Open Center Hydraulic System
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
Print spec sheet with performance curves (.pdf)