|
|
| |
|
|
| |
Pumps > High Volume Axial Flow |
|
| |
|
|
| |
S8M
8” HYDRAULIC SUBMERSIBLE
AXIAL FLOW HIGH VOLUME PUMP |
|
| |
The S8M offers a cost effective
solution for pumping high volumes
of water at low to medium heads.
This pump is great for retention
ponds, flood control, marine
salvage and many other jobs that
require quick and easy set-up.
 |
|
Quick Specs
Discharge Size:
8 Inch
Maximum Flow:
2000 GPM (7600 LPM)
Maximum Head:
59 Feet
Hydraulic Input:
18 GPM (68 LPM) Max.
Hydraulic Pressure:
2800 PSI (190 Bar) Max.
Weight:
190 lbs. (86 Kg)
Key Features
• High Volume Axial Flow design
• High Efficiency mixed flow impeller
• Small Overall Size allows for use in
tight spaces
• Variable Speed hydraulic drive
• Oil Lubricated Seals (can run dry)
• Dependable gear type hydraulic motor
• Safe Hydraulic Drive can be used
where electric power is hazardous or
impractical
• Operates with our HT20 to HT35 power
units or other hydraulic power sources
capable of flows to 18 GPM
Specifications
WEIGHT: 190 lbs. (86 kg)
HEIGHT: 31" (79 cm)
DIAMETER (@ widest point w/o flange): 17" (43 cm)
DISCHARGE: 8-5/8" O.D. Pipe or Flange
SOLIDS HANDLING: 1" (25 mm)
HOSE PORTS: 3/4" NPT
HYDRAULIC COUPLINGS: 3/4" Wing Nut Style
PUMP BODY: Cast Iron
IMPELLER: Bronze
SHAFT: Stainless Steel
SHAFT SEALS: Carbon/Ceramic (Std)
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max. 18 GPM (68 LPM)
OPERATING PRESSURE: Max. 2800 PSI (190 Bar)
POWER SOURCE: Any Open Center Hydraulic System
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
Print spec sheet with performance curves (.pdf)