Quick Specs
Discharge Size: 4 Inch (100 mm)
Solids Handling: 3-1/2” Inch (89 mm)
Maximum Flow: 810 GPM (3,000 LPM)
Maximum Head: 125 Feet (38 M)
Hydraulic Input: 15 GPM (57 LPM) Max.
Hydraulic Pressure: 2600 PSI (177 Bar) Max.
Weight: 254 lbs. (115 Kg)



Key Features
• Open-Vane Shredder Impeller with Tungsten Carbide Cutting Tip
• Hardened Macerator Suction Plate
• Oil Lubricated Seals (can run dry)
• Variable Speed hydraulic drive
• Versions for Portable or Fixed Installations
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Dependable gear type hydraulic motor
• Operates with our HT15 to HT25 power units or other hydraulic power sources capable of flows of 10 - 15 GPM


Specifications
WEIGHT: 254 lbs. (115 kg)
HEIGHT: 28" (71 cm)
WIDTH (w/Discharge elbow): 29 1/2" (75 cm);(Across Volute) 16 3/4" (43 cm)
DISCHARGE: 4" ANSI Flange or 4" NPT(F)
SOLIDS HANDLING: 3 1/2" (89 mm)
HOSE PORTS: 3/4" (-12) SAE(F)
PUMP BODY: Ductile Iron
IMPELLER: Ductile Iron
SHREDDER BLADE: Tungsten Carbide
MACERATOR PLATE: High Chrome Alloy
SHAFT: Stainless Steel
SHAFT SEAL: (Upper) Carbon/Ceramic; (Lower) Silicon Carbide
ELASTOMERS: Buna N
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max. 15 GPM (57 LPM)
OPERATING PRESSURE: Max. 2600 PSI (177 Bar)
POWER SOURCE: Any Open Center Hydraulic System