Quick Specs
Discharge Size: 10 Inch
Solids Handling: 8 Inch (200 mm)
Maximum Flow: 4800 GPM (18,000 LPM)
Maximum Head: 100 Feet (30 M)
Hydraulic Input: 70 GPM (265 LPM) Max.
Hydraulic Pressure: 2500 PSI (170 Bar) Max.
Weight: 830 Lbs. (378 Kg)


Key Features
• Recessed Vortex Impeller (will pass 8" semi-solids)
• Variable Speed hydraulic drive provides a wide range of performance
• Oil Lubricated Seals (can run dry)
• High Efficiency Balanced Vane hydraulic motor
• Can be bolted directly into a pipeline or used as a booster pump
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Operates with our HT100 to HT150 power units or other hydraulic power sources capable of flows of 50 - 70 GPM


Specifications
WEIGHT: 830 lbs. (378 kg)
HEIGHT: 45" (114 cm)
WIDTH (@ widest point): 42 1/2" (108 cm)
DISCHARGE: 10" 125# ASA Flange
INLET: 10" 125# ASA Flange
SOLIDS HANDLING: (spherical semi-solids) 8" (20 cm)
HOSE PORTS: 1 1/4" or 1 1/2" NPT(F) or SAE
PUMP BODY: Ductile Iron
IMPELLER: Ductile Iron
WEAR RING and PLATE: ASTM A36 Steel
SHAFT: 17-4 PH Stainless Steel
SHAFT SEAL: Silicon Carbide
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max 70 GPM (265 LPM)
OPERATING PRESSURE: Max 2800 PSI (190 Bar)
POWER SOURCE: Any Open Center Hydraulic System