Quick Specs
Discharge Size: 3 Inch
Solids Handling: 2 3/4 Inch (7 cm)
Maximum Flow: 700 GPM (2650 LPM)
Maximum Head: 160 Feet (49 M)
Hydraulic Input: 18 GPM (68 LPM) Max.
Hydraulic Pressure: 3000 PSI (204 Bar) Max.
Weight: 155 Lbs. (70 Kg)




Key Features
• Small Overall Size allows pump to fit through a 20" diameter opening
• Oil Lubricated Seals (can run dry)
• Variable Speed hydraulic drive
• Fully Recessed Vortex Impeller (will pass 3" semi-solids)
• Can be bolted directly into a pipeline or fitted with a suction hose for underwater dredging
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Dependable gear type hydraulic motor
• Operates with our HT15 to HT35 power units or other hydraulic power sources capable of flows of 10 - 18 GPM


Specifications
WEIGHT: (Aluminum) 155 lbs. (70kg)
(Ductile Iron) 289 lbs. (131 kg)
HEIGHT: 33" (84 cm)
WIDTH(@ widest point): 19 3/4" (50 cm)
DISCHARGE: 3", NPT(F)
INLET FLANGE: Drilled for 3" and 4", 125# ASA
SOLIDS HANDLING: 3" (8 cm)
HOSE PORTS: 1" (-16) SAE
PUMP BODY: (S3VHL) Heat Treated Aluminum
(S3VHLDI) Ductile Iron
IMPELLER: Stainless Steel
WEAR RING and WEAR PLATE, Stainless Steel
SHAFT: Stainless Steel
SHAFT SEAL: Carbon/Ceramic (Std)
Silicon Carbide (Optional)
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max 18 GPM (68 LPM)
OPERATING PRESSURE: Max 3000 PSI (204 Bar)
POWER SOURCE: Any Open Center Hydraulic System