Quick Specs
Discharge Size: 4 Inch
Solids Handling: 3 Inch
Maximum Flow: 850 GPM (3200 LPM)
Maximum Head: 110 Feet (34 M)
Hydraulic Input: 15 GPM (57 LPM) Max.
Hydraulic Pressure: 2500 PSI (175 Bar) Max.
Weight: 140 lbs. (63 Kg)


Key Features
• 2-Vane Channel Impeller (will pass 3" (75mm) semi-solids)
• Oil Lubricated Seals (can run dry)
• Variable Speed hydraulic drive
• Wide Range of performance
• Can be bolted directly into a pipeline
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Dependable gear type hydraulic motor
• Operates with our HT15 to HT25 power units or other hydraulic power sources capable of flows of 10 - 15 GPM


Specifications
WEIGHT: 140 lbs. (63 kg)
HEIGHT: 25-1/2” (65 cm)
WIDTH (@ widest point): 19-1/2" (50 cm)
DISCHARGE: 4" NPT(F)
INLET FLANGE: 4", 125# ASA
SOLIDS HANDLING: 3" (75 mm)
HOSE PORTS: 3/4" (-12) SAE(F)
PUMP BODY: Ductile Iron
IMPELLER: Ductile Iron
SHAFT: Stainless Steel
SHAFT SEAL: Carbon/Ceramic (Std.); Silicon Carbide (Opt.)
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max. 15 GPM (57 LPM)
OPERATING PRESSURE: Max. 2500 PSI (175 Bar)
POWER SOURCE: Any Open Center Hydraulic System