Quick Specs
Discharge Size: 12 Inch
Solids Handling: 5 Inch (125mm)
Maximum Flow: 8500 GPM (32,173 LPM)
Maximum Head: 110 Feet (34 M)
Hydraulic Input: 90GPM (340 LPM) Max.
Hydraulic Pressure: 2500 PSI (170 Bar) Max.
Weight: 1020 Lbs. (462 Kg))



Key Features
• Balanced High Efficiency Two Vane Closed Channel Impeller
• Will pass 5" (125 mm) semi-solids
• Variable Speed hydraulic drive provides a wide range of performance
• Oil Lubricated Seals (can run dry)
• High Efficiency Balanced Vane hydraulic motor
• Can be bolted directly into a pipeline or used as a booster pump
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Operates with our HT100 to HT200 power units or other hydraulic power sources capable of flows of 50 - 90 GPM


Specifications
WEIGHT: 1020 lbs. (462 kg)
HEIGHT: 45" (114 cm)
WIDTH (@ widest point): 39.5" (100 cm)
DISCHARGE: 12", 125# ASA Flange
INLET: 12", 125# ASA Flange
SOLIDS HANDLING: 5" (125 mm)
HOSE PORTS: 1-1/4" Code 61 Flange or 1-1/2" NPT (F)
PUMP BODY: Ductile Iron
IMPELLER: Ductile Iron
WEAR RING: Ductile Iron
SHAFT: 17-4 PH Stainless Steel
SHAFT SEAL: Silicon Carbide
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max 90 GPM (340 LPM)
OPERATING PRESSURE: Max 2500 PSI (170 Bar)
POWER SOURCE: Any Open Center Hydraulic System