Quick Specs
Discharge Size: 6 Inch
Solids Handling: 5 Inch
Maximum Flow: 1600 GPM (6000 LPM)
Maximum Head: 110 Feet (33.5 M)
Hydraulic Input: 26 GPM (98 LPM) Max.
Hydraulic Pressure: 3000 PSI (204 Bar) Max.
Weight: 195 lbs. (88 kg)


Key Features
• Fully Recessed Vortex Impeller (will pass 5" semi-solids)
• Variable Speed hydraulic drive provides a wide range of performance
• Oil Lubricated Seals (can run dry)
• Dependable gear type hydraulic motor
• Can be bolted directly into a pipeline or used as a booster pump
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Optional silt jetting ring is available for agitating solids into suspension
• Operates with our HT50 to HT75 power units or other hydraulic power sources capable of flows of 15 - 30 GPM


Specifications
WEIGHT: Aluminum, 195 lbs. (88kg); Ductile Iron, 340 lbs. (154 kg)
HEIGHT: 38" (96 cm)
WIDTH (@ widest point): 25" (63 cm)
DISCHARGE: 6" NPT(F)
INLET FLANGE: 6", 125# ASA
SOLIDS HANDLING: 5" (125 mm)
HOSE PORTS: 1" (-16) SAE
PUMP BODY: (S6T), Heat Treated Aluminum; (S6TDI) Ductile Iron
IMPELLER: Stainless Steel
WEAR RING and WEAR PLATE: Stainless Steel
SHAFT: Stainless Steel
SHAFT SEAL: Carbon/Ceramic (Std), Silicon Carbide (Optional)
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max 30 GPM (114 LPM)
OPERATING PRESSURE: Max 3000 PSI (204 Bar)
POWER SOURCE: Any Open Center Hydraulic System