Quick Specs
Discharge Size: 6 Inch
Solids Handling: 5 Inch (125 mm) Without Strainer
Maximum Flow: 1550 GPM (5800 LPM)
Maximum Head: 70 Feet (21 M)
Hydraulic Input: 30 GPM (114 LPM) Max.
Hydraulic Pressure: 3000 PSI (204 Bar) Max.
Weight: 255 lbs. (116 Kg)



Key Features
• Semi Recessed Vortex Impeller (will pass 5" semi-solids)
• Compact Design allows this pump to fit through a 21” opening
• Variable Speed hydraulic drive provides a wide range of performance
• Oil Lubricated Seals (can run dry
) • Dependable gear type hydraulic motor
• Can be bolted directly into a pipeline or used as a booster pump
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Operates with our HT50 to HT75 power units or other hydraulic power sources capable of flows of 15 - 30 GPM


Specifications
WEIGHT: 255 lbs. (116 kg)
HEIGHT: 34" (86 cm)
DIAMETER (@ widest point): 20-3/4" (53 cm)
DISCHARGE: 6" NPT(F)
INLET FLANGE: 6" 125# ANSI
SOLIDS HANDLING: W/O Strainer..5" (125 mm)
With Strainer..2-1/2" (63 mm)
HOSE PORTS: 1" (-16) SAE
PUMP BODY: Ductile Iron
IMPELLER: Ductile Iron
WEAR RING, ASTM A36 Steel
SHAFT: 17-4 PH Stainless Steel
SHAFT SEAL: Carbon / Ceramic (Std)
Silicon Carbide (Opt)
ELASTOMERS: Buna N (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max. 30 GPM (114 LPM)
OPERATING PRESSURE: Max 3000 PSI (204 Bar)
POWER SOURCE: Any Open Center Hydraulic System